What Is Water-Soluble CBD?

What Is Water-Soluble CBD?

Water-soluble CBD can be found in many CBD products available on the market, including CBD tinctures and CBD edibles. Still, many consumers are not aware of what water-soluble CBD is and how it differs from traditional CBD solutions.

And since water-soluble CBD products have slightly different properties than oil-based products, it is valuable to learn about them. In this article, you will find information about what water-soluble CBD products are, how they are made and what sets apart a high-quality CBD water-soluble formula.

What Is Water-Soluble CBD?

Water-soluble CBD is CBD extract that, with the use of nanotechnology, has been broken down into smaller particles. Such CBD can be dissolved in water or other liquids. Due to the fact that CBD extract from the hemp plant is derived in oil form, regular CBD can only be dissolved in oil as well.

Naturally, it is not possible to fully dissolve oil in water, which is one of the reasons why hemp extract is often sold as CBD oils and CBD tinctures with an alcohol base.

Water-soluble products offer something different, as the base of these formulas is not oil or alcohol but water or other liquids. But why was there a need to create this formulation in the first place?

It’s all connected with the properties of oils and how they behave in various conditions. Oil-based CBD can be more difficult to dose and mix with foods and beverages, which is a considerable disadvantage when we consider the ease of use.

It’s also imperative to consider these products’ sensory profiles, as many formulations are intended for oral consumption. Regular CBD oil and some CBD tinctures can be characterized by intense and, in many cases, unpleasant flavor profiles, which poses a challenge for CBD manufacturers and sellers who want to attract as many consumers for their products as possible.

There is also an argument to be made that water-soluble CBD products are easier to absorb by the human body, therefore offering quicker and more stable results for consumers.

Water-soluble CBD was invented to enhance the consumer’s experience and address some of the problems that oil-based products introduce.

There are a few methods through which manufacturers can produce water-soluble CBD and at least two forms under which the end product can be sold and used.

Manufacturing Water-Soluble CBD

The four most common methods of obtaining water-soluble CBD are physical dispersion, ultrasonic dispersion, or by creating an emulsion or using co-solvents.

Physical Dispersion

This is one of the more straightforward approaches, as it does not require adding any additional substances to a CBD formula. Physical dispersion consists of the stratification of CBD oil in the water solution using physical force. In simpler terms, the CBD solution is shaken to the point where CBD oil particles are small enough for the product to be considered water-soluble.

It’s one of the more cost-effective methods of producing a water-soluble CBD product, but the end result may be of less quality as it is prone to clumping and layering. Another important factor is the fact that this method does not protect CBD extract from oxidation.

Ultrasonic Dispersion

In ultrasonic dispersion, producers utilize sonic waves, which serve as a force to initiate the cavitation process. As a result, we receive a CBD extract broken down into nano-size particles, which can then be dissolved in water or other liquid.

A process like this is generally more expensive as it requires using specialized equipment.

Water-Soluble Emulsions

Another approach requires using an emulsifier. Creating a CBD emulsion allows oil particles to separate and prevents them from grouping into larger masses and splitting up from the water base.

This promotes the even distribution of CBD molecules in the solution, making it a water-soluble product. Such a product is easier to mix with other substances, for example, liquids, offering better compatibility with various beverages and foods.


The last method is based on the usage of co-solvents. Various solvents support the process of CBD oil dispersion, resulting in a formula that is uniform and can be considered water-soluble.

Using different co-solvents may cause some complications relating to label claims and the overall quality of the finished product. This method does not produce homogenous results, offering different outcomes depending on the type of solvent used in the production process.

Forms of Water-Soluble Nano CBD

We can encounter water-soluble CBD in two forms: liquid and powder.

Liquid water-soluble CBD can resemble CBD oils and tinctures. It is often sold in similar packaging and quantities. It can be added to various liquids, like water, coffee, etc., and easily incorporated into the consumer’s routine.

On the other hand, a water-soluble CBD powder can be added both to different solids or semi-solid forms and liquids. Popular applications involve adding it to smoothies, drinks, and baked goods.

The Benefits of Water-Soluble CBD

Water-soluble CBD products are purported to offer better bioavailability, which is why they might be a superior choice for many customers looking for easy-to-apply and efficient CBD products.

The full scope of benefits offered by water-soluble CBD are easier to understand once we realize how oils are absorbed by the human body. Oils don’t mix very well with water, and this is extended to the water found in our bodies.

Because oils are hydrophobic, the absorption of oil-based cannabinoids is more difficult and takes longer. Additionally, most CBD oil products are applied orally, which means the oil has to be broken down by the liver first before it has the chance to enter the full circulatory system.

This process takes time, which is why most people can experience the effects of CBD oil and other CBD products after a few hours. During this process, CBD loses some of its potency as well, as the body absorbs only a portion of the compound that was ingested.

In contrast, CBD water-soluble extract is identified by the body as hydrophilic, since the nano CBD particles are so small and diluted in the water base. Beneficial cannabinoids can enter the circulatory system much quicker by bypassing the liver, sometimes within half an hour, offering more predictable effects with each use.

This leads us to another considerable advantage water-soluble CBD has over oil-based products, which is more accurate dosing. It is easier to check the potential effects of CBD water-soluble on a body, which makes it easier to dose properly.

Additionally, standard CBD can be absorbed differently by the body with each use, which does not promote steady and predictable effects. This does not apply to water-soluble CBD, which offers the same effects with each use.

Water-soluble CBD products are also easier to mix with food and beverages, especially those that don’t contain fats, like coffee and tea. This means CBD can be easily incorporated into various meals, offering an effortless way to include the compound in one’s diet, which is considered a significant advantage from the consumer’s standpoint.

How Is Water-Soluble Nano CBD Oil Different From Standard CBD Oil?

The most considerable difference between these products is the fact that one is an oil-based CBD formula, while the other is a water or other liquid-based one. This influences how both product types are absorbed by the human organism, as well as a number of different aspects.

For instance, it is common for regular CBD products, like CBD oils, and CBD tinctures, to have a distinctive, pungent taste. CBD oils especially can be characterized by their earthy flavor. Many customers don’t like the taste of CBD oils, so opting for a product that tastes neutral, such as a water-soluble CBD oil, might be a better choice for them.

As mentioned before, the most crucial differences relate to how both products are absorbed in the body and how consistent their effects are.

Is Water-Soluble CBD More Effective?

It is believed that water-soluble CBD products can be more potent than standard CBD formulations. This belief is supported by data, as recent research shows the effectiveness of nano CBD formulations in the categories like stability, and sustained CBD release.

Since water-soluble CBD oil can offer better bioavailability and more predictable effects with each use, it is reasonable to consider this formula more effective than traditional CBD products.

How Water-Soluble CBD Is Used

Water-soluble CBD can be used in various ways, but the most popular methods involve adding it to favorite beverages and food. It’s one of the easiest ways to incorporate a CBD extract into one’s routine, as it does not require additional effort.

Water-soluble CBD liquid or water-soluble CBD powder products can be added to a drink, taken with edibles, or in the form of capsules.

When taking it with various foods, it’s essential to consider the fat content of said meals. Foods with high-fat content will take longer to digest, slowing down CBD absorption. For the most immediate effect, sublingual administration is recommended.

How Long Does Water-Soluble CBD Stay In the System?

Although it will differ from person to person, the average time needed for an organism to metabolize CBD compound fully can take several days. Of course, its effectiveness is much shorter than that, usually oscillating around two to six hours.

CBD water-soluble formulas offer speedy delivery, which in some cases can result in rapid effects that are more short-lived compared to how traditional CBD works. This, however, is not a hard rule and can vary depending on the person.

What to Look for in Quality Water-Soluble CBD?

How to recognize a quality water-soluble CBD product? Here are some aspects worth considering in the process of developing a product that will be featured in your line.

Quality ingredients

Every CBD product of high quality and effectiveness is manufactured with the inclusion of quality and pure ingredients. Working with certified hemp farmers and selecting safe and tested food ingredients to create a water-soluble CBD formula will deliver you the most promising results.


The true mark of great quality in water-soluble CBD products is how homogenous they are. This will determine their effectiveness, longevity, and the user’s experience. The CBD emulsion which disperses evenly in the product’s formula is the one worth investing in, as it will allow you to create the most effective product.

Quality standards

CBD industry can be quite unregulated, as many CBD manufacturers develop and sell their products without adhering to high-quality standards of production. Many available CBD formulas don’t have certificates from regulatory bodies and most is not FDA-approved.

You should choose the manufacturer who has the quality certificates, conducts regular third-party testing, and invests in high-quality production standards, developing their formulas based on research and advanced technological solutions.


Quality water-soluble CBD oil or water-soluble CBD powder can be characterized as a product with a minimum of 12 months of shelf life.

In Conclusion

Water-soluble CBD formulations bring a lot of real and potential benefits to their users. They are more effective, and potent and offer higher bioavailability than traditional CBD oils and oil-based CBD products. They can be easily mixed with food and beverages, are easier to dose, and offer a more pleasant sensory experience.

Taking CBD water-soluble products can promote states of deep relaxation or pain relief, although as of now these claims are not sufficiently proven by the research.

If you’re interested in developing a water-soluble CBD product, you should find a manufacturer who is dedicated to upholding high standards of quality in regard to ingredients, suppliers, and manufacturing processes that are a part of creating your product.

At Vantage Hemp we are proud to produce regulatory-approved cannabinoid-based medicines and CBD extracts of the highest quality. We produce CBD Distillate, CBD Isolate, and CBD Full Spectrum Oil. See what we can do for you.  

Related Posts